Independent publication2,244 records, as of 21 November 2026
Indo-Pacific Record

Developer of China's J-35 series fighter jets uses 3D printing to advance warplane structural development, building lighter, stronger aircraft

Published by People's Daily Group on · via Global Times — Defense The date is the one the source gives.

Source record

Machine summary

Summary

AVIC's Key Laboratory of Aviation Science and Technology for Novel Aircraft Structures at the Shenyang Aircraft Design and Research Institute—the J-35 developer—has produced a 3D-printed primary load-bearing fuselage component exceeding five meters in length and a multifunctional annular heat exchanger integrating heat transfer, load-bearing, and air extraction, applying six additive manufacturing processes across 19 structural component categories. The article documents a two-decade institutional effort to close the design-manufacturing gap that has historically caused weight overruns and schedule delays in Chinese aircraft development. The framing around 'self-reliance' and the emphasis on engineering validation rather than laboratory demonstration suggests AVIC is positioning these processes as production-ready, though which specific airframes beyond prototypes have incorporated them remains unstated.

Machine-generated from the original text, and distinct from the machine translation of the title. Not reviewed by a human. It is a reading of what was published, not a verification of it.

Source record

Stored source text

Text captured from the source page. Extraction may omit material or include unrelated page elements; consult the original URL when exact wording or completeness matters.

As aviation equipment advances toward lighter, higher-performance and multifunctional designs, 3D printing is emerging as a key technology for overcoming traditional manufacturing constraints. A key laboratory at AVIC Shenyang Aircraft Design and Research Institute, the developer of China's J-35 series fighter jets, has made breakthroughs in the practical application of 3D printing in aircraft development, according to a WeChat post by the Aviation Industry Corporation of China (AVIC) on Saturday. In traditional aircraft structural development, design and manufacturing are often disconnected. This approach can lead to development delays, excessive weight and cost overruns, making it difficult to meet the growing demand for lightweight, high-efficiency, long-lasting, multifunctional and cost-effective aircraft structures that can be developed rapidly. The advances in 3D printing technology at the Key Laboratory of Aviation Science and Technology for Novel Aircraft Structures under AVIC's Shenyang Aircraft Design and Research Institute are helping overcome the constraints of conventional manufacturing, enabling greater design flexibility and more efficient aircraft structural development, according to the release. AVIC's Shenyang Aircraft Design and Research Institute, China's first aircraft design and research institute, has undertaken the development of more than 40 major aviation equipment models across five series, including the J-8, J-11, J-15, J-35 and unmanned aircraft, according to people.com.cn. "With no need for molds, rapid production capabilities and the ability to fabricate complex structures, 3D printing plays an important role in aircraft development. It enables the integration of design and manufacturing, as well as structure and function, giving designers greater freedom," Cui Can, deputy director of the laboratory, was quoted by the AVIC release as saying. Cui added that 3D printing serves as a key accelerator, particularly during the prototyping of new aircraft, allowing a wide range of innovative structural designs to be rapidly turned into physical components for testing and evaluation. 3D printing technology is driving the manufacturing of large aircraft structures toward greater integration. In recent years, the laboratory has achieved breakthroughs in developing primary load-bearing aircraft structures, successfully producing an integrated structural component measuring more than five meters in length using 3D printing technology. Located in the aircraft's central fuselage, the component primarily serves to bear and transfer structural loads, according to AVIC. Installed inside an aircraft's air intake, the 3D-printed multifunctional annular heat exchanger integrates heat transfer, air extraction, load-bearing and maintenance functions. With the help of 3D printing technology, the research team also incorporated manufacturing requirements into the design process from the outset, developing complex internal flow channels that increase the heat transfer surface area while reducing the component's weight. Turning a successfully printed laboratory prototype into a component suitable for actual aircraft applications required overcoming major challenges in manufacturing and engineering validation. To address thermal stress, deformation and cracking during the printing of large components, the team developed an innovative process combining segmented component printing and additive fusion joining. To overcome difficulties in finishing the intricate internal channels of the annular heat exchanger, the researchers independently developed a specialized magnetic grinding device. By placing fine steel needles inside the flow channels and controlling their movement with an external magnetic field, the device enables the needles to slide, tumble and polish the internal surfaces without damaging the structure. Over more than two decades, the laboratory has pursued a path of innovation, progressing from technological exploration to engineering applications and from individual breakthroughs to the development of comprehensive technological capabilities. To date, it has successfully applied six additive manufacturing processes, 13 types of metal materials and 19 categories of 3D-printed structural components in aircraft development programs, said the release. The team has established a comprehensive technological development framework encompassing the incubation of novel structural concepts, breakthroughs in key technologies and engineering development. These efforts have helped overcome technical bottlenecks in aircraft development and advance innovation in aircraft structural technologies. The continued advancement and wider application of 3D printing technology have made innovative structural concepts a reality, including large-scale integrated structures, topology-optimized configurations, functionally graded composite structures and the integration of structural and functional capabilities. These advances are expected to enhance the overall performance and quality of airframe structures while supporting China's pursuit of self-reliance and strength in aviation science and technology.

Cite this record

Cite the original item. Add the IPR record when you relied on text, translations or labels shown here.

The original item

Source text. People's Daily Group. "Developer of China’s J-35 series fighter jets uses 3D printing to advance warplane structural development, building lighter, stronger aircraft." Global Times — Defense, 2026-11-14. https://www.globaltimes.cn/page/202611/1374287.shtml.

This record on IPR

As held. Indo-Pacific Record, Record 6437, archive snapshot of 2026-11-21 (2,244 records).

Note. The summary held for this record is machine-generated; human review is not recorded. The headline is an English-language original.

The record number and this record path are locators inside the 2026-11-21 snapshot, not a DOI, accession number, permanent identifier, public permalink, or published route. Citation guide

Where this came from When it was collected, what software did with it, and every stored field

How it reached this page

  1. Published14 November 2026, by People's Daily Group
  2. Collected2026-11-14 18:35:25 UTC, run 207
  3. Machine readingAnalyzed
  4. AnalysisNot in a published issue's source trail

Processing status

Analyzed

Passed relevance screening and completed analysis. The summary is machine-generated.

Machine assessment Not flagged for closer review. This is a software triage result, not an editorial judgment.

Record fields

What is known about this record and where each part came from.
DeskChina Desk
Publishing institutionPeople's Daily Group
Source outletGlobal Times — Defense (global_times_mil)
Source languageEnglish (en) — an attribute of the source, not of this record
Source-stated publication date2026-11-14
Original URLhttps://www.globaltimes.cn/page/202611/1374287.shtml
Collected at2026-11-14 18:35:25 — collection metadata, not a publication time
Content fingerprinta46150a6d898556957f5736c70d653fbb4b031a94a011b00a1f6686b14d9560e — taken when the record was captured, over the stored original title and text
Collection run207
Analysis modelclaude-sonnet-4-6
Prompt versionv1

Each field is defined in the data dictionary, including when it may be missing and where it stops being reliable.

When this record was last updated